RosRoca Olympus Mini, Руководство по обслуживанию

Страница: 46 / 110

79. Press the two push‑buttons on the ‘Tailgate
lowering’ control panel simultaneously until the
tailgate engages locks and then release the push‑
buttons.
4543-OM1-R-GB-G1
4580-OM1-R-GB-G1
• The engine speed should increase.
• The ejection plate should should retract into
the body for 1‑2 seconds before tailgate starts
to lower.
• Tailgate should rotate smoothly downwards
about the hinge pins until it engages face of
body, then lower into locks.
• Vehicle reversing’ alarm should sound until the
tailgate engages locks when it should silence.
2748-DS005-OL1-D-GB-G2
0 No errors
0 No errors
0 No errors
Hyd Oil Temp
0 No errors
0 No errors
09:00:00
Hyd_Oil_Pressure
0 No errors
0 No errors
0 No errors
Hyd Oil Temp
0 No errors
0 No errors
32 o C
01.06.2013 09:00:00
Hyd_Oil_Pressure 2 Bar
80. If the vehicle is fitted with a waste container lifting
device carry out the daily safety checks described
in ‘3.2 Daily safety checks ‑ waste container lifting
device (when fitted)’ on page 3‑22.
81. If the vehicle is fitted with footboards carry out the
daily safety checks described in ‘3.3 Daily safety
checks ‑ footboard (when fitted)’ on page 3‑24.
82. Check level of oil in hydraulic oil tank and top up
if required (see ‘4.1 To check hydraulic system oil
level’ on page 4‑3).
3.2 daily safety checks - waste
container lifting device (when
fitted)
Caution
If one or more footboards is fitted,
lower footboard(s) before operating
waste container lifting device.
The following daily safety checks must be carried
out on the waste container lifting device mechanism,
in addition to checks specified in the chassis
manufacturer’s service information and section 3.1
Daily safety checks ‑ refuse collection body before the
vehicle commences service.
The following checks assume that the aforementioned
daily safety checks have been carried out, the engine is
running and the refuse collection bodywork operating
system is in the ‘Body system run mode’ with the
compaction mechanism and lifting device controls
energised.
1. If the vehicle is fitted with foot boards, lower them.
2. If waste container lifting device is fitted with DIN
arms, open the DIN arms.
• Check that they open freely and are not seized.
• Check that springs hold DIN arms in open
position.
• Check that the lock plates in the hooks move
freely and are not seized.
4614-OM1-R-GB-G1
wARNING:
KeeP CLeAR OF THe MOVING MeCHANISM.
dAILY CHeCKS
3‑22
OM1R-SM-GB01R
3