manualshive.com logo in svg

RosRoca Olympus Mini, Руководство по обслуживанию

Поделиться
Скачать
RosRoca Olympus Mini Скачать руководство пользователя страница 47

3.  Operate the ‘Lifting device up’ push‑button.

4561-OM1-R-GB-G1

•  Check that the lifting device rises.

•  Check that the lip clamp closes when the 

mechanism passes 30° (1).

•  Check that the lock plates in the DIN arm 

hooks close (2) as the lifting device rises.

4705-OM1-R-GB-G1

2

1

4.  While the lifting device is rising release the push‑

button.

•  Check that the lifting device mechanism stops 

immediately and remains in the stopped 
position.

5.  Operate the ‘Lifting device up’ push‑button until 

the lifting device reaches full height.

6.  Operate the ‘Lifting device down’ push‑button.

4562-OM1-R-GB-G1

•  Check that the lifting device lowers.

7.  While the lifting device is lowering release the 

push‑button.

•  Check that the lifting device mechanism stops 

immediately and remains in the stopped 
position.

8.  Operate the ‘Lifting device down’ push‑button until 

the lifting device reaches fully down position.

•  Check that the lip clamp opens when the 

mechanism passes 30° (3).

•  Check that the lock plates in the DIN arm 

hooks open (4) as the lifting device lowers.

4706-OM1-R-GB-G1

4

3

9.  Stow DIN arms.

•  Check that springs hold DIN arms in stowed 

position.

dAILY CHeCKS

3‑23

OM1R-SM-GB01R

3

Содержание Olympus Mini















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды