
5
Cleaning
The refuse collection vehicle and its ancillary
equipment must be kept as clean as possible to
prevent potential health hazards and promote trouble
free operation.
The vehicle may be cleaned using proprietary
detergent solutions for cleaning commercial vehicles
and steam cleaning according to the following
guidelines.
Caution:
Caustic or acidic cleaning solutions must not
be used as they may damage components
and assemblies. use of such solutions may
invalidate the warranty granted with this
product.
wARNINGS:
NeVeR eNTeR THe TAILGATe OR BOdY TO
CLeAN deBRIS uNLeSS:
• YOu KNOw ANd CAN wORK TO
THe SAFe wORKING PROCeduReS
deTAILed IN THe SeRVICe MANuAL.
• THe ‘BOdY MAIN’ SwITCH IS IN
THe OFF POSITION wITH THe KeY
ReMOVed.
• THe IGNITION IS IN THe OFF POSITION
wITH THe KeY ReMOVed.
• A SIGN ReAdING ‘dO NOT START OR
OPeRATe VeHICLe’ IS SeCuRed TO THe
STeeRING wHeeL.
• ALL CAB dOORS ARe LOCKed wITH
THe KeYS ReMOVed.
• YOu ARe IN POSSeSSION OF ALL THe
KeYS, ANd ANY SPARe KeYS.
weAR PROTeCTIVe CLOTHING, GLOVeS
ANd GOGGLeS wHeN CLeANING. LOOSe
deBRIS MAY Be eJeCTed FROM THe BOdY
ANd TAILGATe.
THe VeHICLe IS FITTed wITH A BOdY/
TAILGATe SeAL, wHICH MINIMISeS FLuId
LOSS wHeN COLLeCTING VeRY weT
ReFuSe. IT IS IMPORTANT THe SeAL
ANd ITS MATING FACe ARe KePT CLeAN.
CLeANING SHOuLd TAKe PLACe AFTeR
THe dISCHARGe OPeRATION.
RePORT ANY SeAL dAMAGe TO
SuPeRVISION IMMedIATeLY.
wHeN CLeANING THe TAILGATe ANd
BOdY Be AwARe OF dANGeROuS ReFuSe
SuCH AS GLASS ANd HYPOdeRMIC
NeedLeS.
NeVeR CLeAN THe SeAL AReA uNLeSS
THe TAILGATe IS FuLLY PROPPed.
MAKe SuRe THAT ALL BOdY ANd
TAILGATe dRAINS ARe CLOSed ANd
THAT THeIR OPeRATING LeVeRS ARe NOT
PROTRudING FROM THe SIde OF THe
VeHICLe wHeN CLeANING IS COMPLeTed.
FIRe HAZARd.
ReFuSe PuSH OVeR AT FRONT OF BOdY
due TO eXCeSS BuILd uP OF ReFuSe CAN
FALL ONTO HOT eNGINe ANd eXHAuST.
INSPeCT THe VeHICLe dAILY TO MAKe
SuRe THeRe IS NO ReFuSe, PAPeR OR
FLAMMABLe MATeRIALS NeAR THe
eNGINe OR eXHAuST. THeSe COuLd
CAuSe A FIRe wHeN THe eNGINe IS
STARTed. IF NeCeSSARY, TILT THe CAB
(See CHASSIS-CAB MANuFACTuReR’S
OPeRATOR’S HANdBOOK) TO MAKe A
THOROuGH INSPeCTION.
FIRe HAZARd.
OIL SPILLAGe AT FRONT OF BOdY COuLd
Be IGNITed BY HOT eNGINe ANd eXHAuST.
CLeAN uP ANY SPILLAGe ANd eNSuRe
THAT LeAKS ARe ReCTIFIed IMMedIATeLY.
Caution:
High pressure water jets can seriously
damage electrical equipment. A minimum
distance of one metre must be maintained
when Pressure washing.
CLeANING
5‑3
OM1R-SM-GB01R
5
Содержание Olympus Mini
