User Manual
RPC-2.92 Calibration Kit
02CK001-150 and 02CK010-150
02CK001-150
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260 D-84526 Tittmoning Germany
www.rosenberger.com
Tel. : +49 8684 18-0
Email : [email protected]
Page
6 / 17
D
ie
s
e
s
D
o
k
u
m
e
n
t
is
t
u
rh
e
b
e
rr
e
c
h
tl
ic
h
g
e
s
c
h
ü
tz
t
●
T
h
is
d
o
c
u
m
e
n
t
is
p
ro
te
c
te
d
b
y
c
o
p
y
ri
g
h
t
●
R
o
s
e
n
b
e
rg
e
r
H
o
c
h
fr
e
q
u
e
n
z
te
c
h
n
ik
G
m
b
H
&
C
o
.
K
G
2. Specifications
2.1 Environmental Requirements
The electrical performance of vector network analyzers and test port cables are sensitive to
ambient temperature drift. Most manufacturers limit the allowable temperature drift to ± 1 K during
measurement calibration and during measurements when the network analyser error correction is
turned on. For further information please refer to the VNA specifications.
NOTE: With your fingers being a heat source, avoid unnecessarily handling the devices
during calibration.
The calibration standards are less sensitive to temperature changes. The operating temperature
range for which the specifications are valid is defined in the specific data sheets.
2.2 Electrical and mechanical Specifications
Electrical and mechanical specifications are defined for all calibration standards, gauges and the
torque wrench in the specific data sheets.
3. Standard Definitions
3.1 Standard Definitions
Standard definitions provide the data needed to mathematically describe the electrical
characteristics of each calibration standard. Two types of standard definitions are available:
•
Model based
(standard delivery): These are the traditional standard definitions and can be
used on both old and modern VNAs. The values of these constants are theoretically derived
from the physical dimensions and material of each calibration standard, or from actual
measured response. All necessary values are printed on the Standard Definition Cards and
stored as data files on an USB stick. Both are included with this calibration kit.
•
Data based
(optional): These standard definitions allow more accurate measurements but can
only be used on modern VNAs. They consist of a set of complex measurement values for each
calibration standard in a narrow frequency step size. A file containing these values for all Open,
Short and Load calibration standards is delivered on an USB stick.
These standard definitions are used in the calibration of the VNA to determine the systematic
errors of the measurement system. Please always use the most recent source of information
(Standard Definitions Cards or VNA specific files).
