manualshive.com logo in svg

Rosemount 1199, Справочное руководство

Поделиться
Скачать
Rosemount 1199 Скачать руководство пользователя страница 21

Reference Manual 

00809-0100-4002, Rev BB
November 2012

Rosemount 1199

www.rosemount.com

Section 3

Installation

Seals Handling and Installation Considerations  . . . . . . . page 3-1
Gaskets   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-2
Tagging   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-3
Flanged Type Seals: Flush Flange (FFW) or Extended (EFW) 

Diaphragm  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-4
RFW Seal  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-6
PFW Pancake Type Seals . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-7
RTW Threaded Type Seals  . . . . . . . . . . . . . . . . . . . . . . . . . page 3-8
WSP Saddle Type Seals  . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-9
TFS Wafer Style In-line Seal . . . . . . . . . . . . . . . . . . . . . . . . page 3-11
Hygienic Tank Spud Seals  . . . . . . . . . . . . . . . . . . . . . . . . . page 3-12
Hygienic Flanged Tank Spud Seals . . . . . . . . . . . . . . . . . . page 3-13
Hygienic Tank Spud Welding Guidelines (SSW)  . . . . . . . page 3-13
Hygienic Tank Spud Welding Guidelines (SSW)  . . . . . . . page 3-13
Hygienic Tri-Clamp® Seals (SCW)   . . . . . . . . . . . . . . . . . . page 3-16

This section contains installation information for various types of Rosemount 
1199 Remote Seals. 

Additional specialized remote seals are available. Contact Emerson Process 
Management Technical Support for installation information on these seals. 

SEALS HANDLING AND 
INSTALLATION 
CONSIDERATIONS

When unpacking or handling seal system assemblies, do not lift the seal or 
transmitter by gripping the capillaries.

Avoid sharply bending or crimping the capillary tubing. The minimum bending 
radius of the capillary tubing is 3-in. (8 cm).

When using heat or steam tracing, exercise caution if PVC coating is added 
onto capillary. The PVC coating on the armor can break down at temperatures 
around 212 °F (100 °C). Best practice for heat and steam tracing is to regulate 
the temperature above the maximum ambient temperature for a consistent 
result. To avoid accuracy effects and thermal stress, the capillary should not 
be partially heated.

The material of a remote seal is designed to withstand pressure and wear 
from process material, but outside of process connection conditions, remote 
seals are delicate and should be handled with care. 

NEVER

 attempt to disconnect the seals or capillaries from the transmitter or loosen bolts. 

Doing so will result in loss of fill fluid and will void the product warranty. 

Содержание 1199



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды