Rosco Maximizer 2B, Инструкция по эксплуатации, обслуживанию и ремонту

Страница: 41 / 362

4
Rosco Maximizer 2B Asphalt Distributor 4-15
Specifications
Table 4-15. Flats Method Values For Selected
Terminations
Flats Method Values
Termination
Type
Dash Size Flats
1/16 Inch
JIC 4 1 .5 - 1 .75
JIC 6 1 .0 - 1 .5
JIC 8 1 .5 - 1 .75
JIC 10 1 .0 - 1 .5
JIC 12 1 .0 - 1 .5
JIC 16 .75 - 1 .0
JIC 20 .75 - 1 .0
JIC 24 .75 - 1 .0
JIC 32 .75 - 1 .0
JIS 4 .5 - 1 .5
1 . Seal faces must be in contact and the fitting fully
hand tightened before marking flats.
2 . Flats method is most accurate for the first
assembly cycle, for multiple disassembly/
assembly cycles torque values are more reliable.
3 . Tightening 2 flats or more is analogous to severe
over torque and may damage seal faces.
Table 4-13. Torque Specifications For DIN 24, DIN
60, and Inverted Cone Style Coupling Terminations
DIN 24, DIN 60, and Inverted Cone
Size Torque
mm ft-Lb
Light Series
Tube OD
Heavy
Series
Tube OD
Min Max
6 7 15
8 15 26
10 8 18 30
12 10 22 33
14 12 26 37
15 14 30 52
16 30 52
18 20 44 74
22 25 59 89
28 30 74 111
38 74 162
35 133 184
42 148 221
Table 4-14. Torque Specifications For BSP 30 °
Inverted Cone and JIS Coupling Terminations
BSP 30° Inverted Cone and JIS
Dash Size Torque
mm ft-Lb
1/16 Inch Min Max
-2 7 9
-4 11 18
-6 19 28
-8 30 36
-10 37 44
-12 50 60
-16 79 95
-20 127 152
-24 167 190
-32 262 314
Return to
Last Viewed
Return to
Thumb Index