Rorke Data Galaxy Raid GALHDX-7370S-8U4D Скачать руководство пользователя страница 61

Страница: 61 / 96

Galaxy RAID GALHDX-7370S-8+12U4D Installation and Hardware Reference Manual

Power On

4-8

Hard drives:

Hard drives have been correctly installed on the drive trays.

Drive trays:

ALL

the drive trays, whether or not they have a hard drive,

have been installed into the subsystem.

Cable connections:

The host ports on the subsystem have been correctly

connected to host computer(s).

Power cables:

The power cords have been connected to the PSU modules on

the subsystem and plugged into main power.

Ambient temperature:

All the subsystem components have been acclimated

to the surrounding temperature.

4.3.2 Power On Sequence

When powering on the ES subsystem, please follow the steps below:

Power on any expansion enclosures if applied

If you connect any expansion enclosures to the subsystem, power on those

expansion enclosures before powering on the subsystem.

Power on the subsystem

The subsystem should be powered on before the host computers. The power on

procedure for the subsystem is described in

Section 4.3.3

Host computers

Host computers should be the last devices that are turned on. Please refer to the

documentation that came with your host computers to see its own power on

procedure.

4.3.3 Power On Procedure

Plug in all power cords to the power connectors located at the rear of the

subsystem. Use the power cables that came with the subsystem to connect the

subsystem to the power outlet, separate power sources, or UPS devices.

Turn on the power supply switches for both power supply units.

The subsystem is now turned on and the self-test will start automatically.

The “Power” LED on the front LCD panel will turn blue. (See

Figure 4- 10

)

Содержание Galaxy Raid GALHDX-7370S-8U4D

































































































Результаты поиска

Содержание Galaxy Raid GALHDX-7370S-8U4D

Отзывы:

Похожие инструкции для Galaxy Raid GALHDX-7370S-8U4D

Бренды по названию

Популярные бренды

Rorke Data Galaxy Raid GALHDX-7370S-8U4D, Руководство по установке и аппаратным средствам

Результаты поиска

Содержание Galaxy Raid GALHDX-7370S-8U4D

Отзывы:

Похожие инструкции для Galaxy Raid GALHDX-7370S-8U4D

Бренды по названию

Популярные бренды