Chapter 5: Subsystem Maintenance
Subsystem Maintenance
5-19
Figure 5-27: Removing the Cooling Module
Step 2.
Install the new cooling module
by aligning the module with the
cooling module slot on the lower section of the PSU module and
gently sliding it in. The latches will hold the module in place. (See
Figure 5-28
)
Figure 5-28: Installing the New Cooling Module
5.8 Replacing a Failed Hard Drive
5.8.1 Hard Drive Maintenance Overview
•
Hot-swappable drive trays:
The drive trays are all hot-swappable. If a
hard drive fails, it can be replaced while the subsystem is still running.
•
Handles:
If the failed hard drive is behind either the left or right front
handle, unfold the handles to access the drive trays. (See
Figure 5-29
)
