Galaxy A16F-R2422 Installation and Hardware Reference Manual
Subsystem Maintenance
5-4
Step 2.
Remove the screws
on the levers at the back of the controller
module. (See
Figure 5-1
)
Figure 5-1: Removing the Controller Module Screws
Step 3.
Remove the controller module
by pressing down the two (2) levers
at the back of the controller module. The controller module will
automatically be eased out of the controller module bay. (See
Figure 5-2
)
Figure 5-2: Press Levers Down
Step 4.
Gently pull the controller module out of the subsystem. (See
Figure
5-3
) Place the controller module on a clean surface.
Figure 5-3: Pull the Controller Module Out
