ROPA Tiger 6 Скачать руководство пользователя

Страница: 212 / 564

Operation

Steering

212 / 564

6.10.3.3

Activating rear wheels autopilot

Automatic rear axle steering may be activated either manually or automatically. Pre-

condition for activation is that on the R-Direct, in the menu "Autopilot", line "Front axle

signal of", the option "

Share

" or "

Row+share

" is set.

ADVICE

If, in the menu "Autopilot", line "Signal from front axle", the option "Row" is selected,

then the rear axle autopilot cannot be activated.

Manual activation

of the rear axle autopilot is always possible, if on the R-Touch, in

the menu "Autopilot", line "Activation rear axles", the option "manual" is selected and

additionally the front axle autopilot has been activated by pressing on the footswitch

"Autopilot". To control, the R-Touch displays the icon on the front axle.

If the footswitch "Autopilot" is then released for at least a half second, and then

pressed for at least one second, then the rear axle autopilot is additionally activated.

The icon appears on the R-Touch on the front and rear axles.

ADVICE

Another method for switching the rear axle autopilot on and off is to click briefly the

field on the R-Touch. To switch on the rear axle autopilot using the field the

front axle autopilot must be already activated.

Содержание Tiger 6





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Tiger 6

Отзывы:

Похожие инструкции для Tiger 6

Бренды по названию

Популярные бренды

ROPA Tiger 6, Оригинальное руководство по эксплуатации

Результаты поиска

Содержание Tiger 6

Отзывы:

Похожие инструкции для Tiger 6

Бренды по названию

Популярные бренды