ROPA Tiger 6, Оригинальное руководство по эксплуатации

Страница: 152 / 564

Operation
Joystick
152 / 564
3
4 5
(3) Key for activation of offset-steer 0-1-2 in operating mode "Field" and central
position of rear axles in operating mode "Road"
The driving speed must be over 0.5 km/h! For comprehensive description See
Page 202 .
(4) X-Y key defoliator depth
Push the key diagonally to the front left/right:
Depth-control wheels left/right higher = leaf topping lower.
Pull the key diagonally to the back left/right:
Depth-control wheels left/right lower = leaf topping higher.
(5) X-Y key lifting depth
Push key diagonally to the front left/right: Raise depth-control shaft left/right.
Roller movement is lower then. The lifting depth increases, i.e. the lifting shares are
moved lower in the ground.
Pull the key diagonally to the back left/right: Lower depth-control shaft left/right.
Roller movement is higher then. This raises the shaft movement, the lifting depth is
reduced, i.e. the shares are moved shallower.
ADVICE
The keys ( 4 ) and ( 5 ) are programmed for the following dual function: if, when pressing
the X-Y keys ( 4 ) and ( 5 ), simultaneously the multi-key ( 11 ) is pressed, then both sides
of the defoliator or lifter are adjusted simultaneously, no matter to which side you move
the X-Y key.
6
(6) Key machine drive ON/OFF
Pressing this key you switch the drive of defoliator, lifter, infeed conveyor, strainer
wheel, elevator and bunker auger on.
This icon appears on R-Touch.
If the key is pressed again, then the drive is turned off again.
The machine drive may only be switched on if the following conditions are fulfilled:
operating mode "Field" is switched on, articulation joint of the unload conveyor is
swung out and driver‘s seat is occupied.