ROPA Tiger 6 Скачать руководство пользователя

Страница: 66 / 564

Operating Components

Driver’s seat

66 / 564

5.4

Driver’s seat

Safety instructions:

To prevent damage to the driver’s back, the seat must be adjusted for the driver’s

weight before use and before every change of driver.

To prevent injury, no objects should be placed within the moving area of the driver’s

seat.

To eliminate any risk of accident, the settings must be checked to ensure they are

correctly engaged before driving the vehicle.

Adjustments must not be made while operating or driving.

When the backrest upholstery has been removed, the backrest frame must be sup-

ported, e.g. held in place, before the backrest adjuster is operated. If you fail to do

so, there is a danger that the backrest frame may jerk forward and cause injury.

If you make any changes to the standard seat (e.g. not using original retrofitting

and spare parts made by Grammer) it may no longer meet the safety standards to

which it is tested. Functions may be impaired, threatening your safety. For this rea-

son, any structural change to the driver‘s seat must be approved by Grammer.

Fasteners must be checked regularly for tightness. If the seat wobbles there may

be loose bolts or other faults. If the seat does not function correctly (e.g. the seat

suspension), contact a specialist workshop immediately to arrange for repairs to be

carried out.

The driver’s seat may only be installed, maintained and repaired by specialist staff.

If you fail to do so, your health may be affected and the risk of accident increases.

Weight adjustment

The seat should be adjusted for the dri-

ver’s weight by briefly pulling the actu-

ator lever of the automatic weight and

height adjuster (arrow) with the vehicle

at a standstill and the driver sitting on the

seat.
The driver must sit absolutely still during

adjustment.
Set the shock absorber to the soft setting

before adjusting the weight.
To prevent damage to health, the setting

for the driver’s weight must be checked

and adjusted as necessary before the

vehicle is driven.

Содержание Tiger 6





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Tiger 6

Отзывы:

Похожие инструкции для Tiger 6

Бренды по названию

Популярные бренды

ROPA Tiger 6, Оригинальное руководство по эксплуатации

Результаты поиска

Содержание Tiger 6

Отзывы:

Похожие инструкции для Tiger 6

Бренды по названию

Популярные бренды