ROPA Tiger 6 Скачать руководство пользователя

Страница: 25 / 564

Safety

General symbols and instructions

25 / 564

2.1

General

The machine has been manufactured according to the current state of technology and

tested for safety.
The machine is CE compliant and therefore conforms to the respective European reg-

ulations for free movement of goods within the European Union respectively the Euro-

pean economic region.
Modifications to this machine may only be performed with the express approval of the

manufacturer, since otherwise the manufacturer's warranty lapses. In addition, the

road traffic registration may lapse and other registrations of the machine may become

invalid. The operating manual supplied must be strictly observed. The manufacturer

shall not be liable for damage caused by incorrect handling, inappropriate application

or incorrect repairs respectively missing maintenance and service carried out by the

customer. The machine may only be operated in a technically perfect condition, for its

intended purpose and with due consideration of the risks involved.

2.2

Obligations of the entrepreneur

The entrepreneur employing the machine, respectively his agent, is obliged:

to observe the applicable European and national work and safety regulations.

to instruct the machine operators about their special obligation for safe driving of

the machine. These instructions must be given anew before the start of each sea-

son. Records must be prepared about giving of these instructions, which must be

signed by the entrepreneur and the instructed machine operator. These records

must be kept for at least one year by the entrepreneur.

before first use of the machine, to instruct the machine operators about operation

respectively about safe handling of the machine.

Forms for these instructions may be found in Chapter 9 of this operating manual (doc-

umentation of instructions given to the driver). When needed, please copy these forms

before completing them.

2.3

General symbols and instructions

The following symbols are used for safety instructions in this operating manual. They

serve as a warning against possible personal injury or material damage, or provide

help in facilitating work.

DANGER

This signal word warns of imminent danger of fatal accident or serious injury. This haz-

ard may always occur if the operating or working instructions are not or only impre-

cisely observed.

WARNING

This signal word warns you of a possibly dangerous situation which may lead to

serious injury or to death. This hazard may always occur if the operating or working

instructions are not or only imprecisely observed.

Содержание Tiger 6





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Tiger 6

Отзывы:

Похожие инструкции для Tiger 6

Бренды по названию

Популярные бренды

ROPA Tiger 6, Оригинальное руководство по эксплуатации

Результаты поиска

Содержание Tiger 6

Отзывы:

Похожие инструкции для Tiger 6

Бренды по названию

Популярные бренды