ROPA KS 475, Перевод оригинального руководства по эксплуатации

Страница: 61 / 110

Operation
Attachment/detachment of the machine
Tractor front attachment
The illustration shows KS 475
(1) Angular gear guard cone
(2) Angular gear protective cap
– Check whether the guard cone ( 1 ) and the protective cap ( 2 ) are installed correctly
on the KS 475. If not, dismantle both parts and mount them again on the correct
side of the gear.
– For the KS 490, check whether the angular gear is installed correctly. If not, dis-
mantle the angular gear and mount it again correctly.
The illustration shows KS 475
(3) Cardan shaft
(4) Top hole lower link arm right
(5) Bottom hole lower link arm right
(6) Bottom hole lower link arm left
(7) Top hole lower link arm left
(8) Hole upper link arm for transport position
(9) Slot upper link arm for working position
– Connect the cardan shaft to the machine.
– Drive the tractor forward and fit the machine correspondingly into the two upper
holes or the two lower holes for the lower link arms. Use the balls for the lower link
61 / 110