ROOTECH ACCURA 2350-DCM Скачать руководство пользователя страница 2

Страница: 2 / 40

Notice

Accura 2350-DCM User Guide

Page 2

ⓒ

Notice

Symbols

Caution

Indicates the presence of dangerous voltage which can cause severe injury or death if

proper precautions are not followed.

Caution

Alerts users of the presence of hazards which can cause injury to persons, property

damage or damage to the device if proper precautions are not followed.

Note

Indicates major instructions for the installation, operation, and maintenance of the

product.

Indicates alternative voltage or current.

Indicates direct voltage or current.

Installation Considerations

The installation, operation, and maintenance of the product should be performed only by qualified,

competent personnel that have received appropriate training for high voltage and current devices.

Caution

If hazardous voltages are mishandled while installing and operating the product in the field, it can

cause serious injury or death.

◼

This device must be installed and serviced only by qualified personnel who have in-depth knowledge of

installing, commissioning and operating the device and have had appropriate training. He or she should

have read and understood the various safety measures and warnings stated in the instructions.

◼

Before carrying out any work on the device, switch off the power supply to the device.

◼

Always use an appropriate voltage detection device to confirm the absence of voltage.

◼

Always power the device with the correct rated voltage.

◼

Install the device in a suitable electrical cabinet by following recommended installation instructions.

Failure to take these precautions could cause serious injuries or death.

Содержание ACCURA 2350-DCM









































Результаты поиска

Содержание ACCURA 2350-DCM

Отзывы:

Похожие инструкции для ACCURA 2350-DCM

Бренды по названию

Популярные бренды

ROOTECH ACCURA 2350-DCM, Руководство пользователя

Результаты поиска

Содержание ACCURA 2350-DCM

Отзывы:

Похожие инструкции для ACCURA 2350-DCM

Бренды по названию

Популярные бренды