ROOTECH ACCURA 2350-DCM, Руководство пользователя

Страница: 25 / 40

Accura 2350-DCM User Guide Chapter 2 Accura 2350-DCM Operation/Setup
ⓒ
2018 Rootech Inc. All Rights Reserved Page 25
Performing Device Setup
Button Function
[Display
screen]
Displays the module ID and measured values in sequence
[Setup]
Short press
1
or
Double press
2
Move to the setup screen in forward or backward direction.
(The setup menu is sequentially selected each time the SET button is
pressed.)
Long press 3
Move to the screen on which you will change settings.
Preset values blink and can be changed.
Short press or
Double press
Select a preset value to change by pressing the button in forward or
backward direction.
(The setup value changes sequentially each time the button is
pressed.)
Long press Return to the setup screen and save the selected setup value. And
then the screen stops blinking.
If there is the next digit to change, move to the screen where you
will change the settings.
1. Press the button and release it immediately. Short press the button to move to the previous screen.
2. Short press the button and release it after short pressing it again within 0.2 seconds. Double press the button to
move to the next screen.
3. Release the button after pressing it for 1 second.
Note
If there is no button operation for 10 seconds on the setup mode, the screen automatically returns to the display
mode. If there is no button operation for 25 seconds on the screen where you will change settings, the
automatically returns to the display mode.