Ronde & Schwarz CLIPSTER, Руководство по оборудованию

Страница: 70 / 98

Maintenance

Power Supply Maintenance
70 CLIPSTER | Hardware Guide | Hardware Generation V+
Rohde & Schwarz DVS GmbH
4. Select DVS Rescue and press [Enter] on your keyboard.

Once the loading has finished, you will see the R&S DVS
Rescue script with its options on the screen. Your display
should look similar to the following:
5. To restore your system disk from the internal USB, press [2]
and then
[Enter] on your keyboard.

A list of possible target devices will be detailed on the
screen. The system disk normally is the ’ATA’ disk with, for
example, ’sda’, ’sdb’ or ’sdc’ as its device name:
To complete the loading of the R&S DVS Rescue environ-
ment some user entries are required. For this follow the
instructions given on the screen.
The loading of the environment and the process itself will
both try to initialize hardware that may not be present on
your system. Any error messages displayed during load-
ing/initialization, e.g. Failed or Warning, can be disregard-
ed. The backup/recovery process should work
nonetheless.
Data Loss
The actual device name of the system disk
depends on the manufacturing process. A recovery
will overwrite all your data.
Continue with the following steps only when
you are able to identify the correct target
device.
--- DVS Rescue ---
1 - Backup on internal USB device
2 - Restore from internal USB device
3 - Reboot the system
4 - Poweroff the system
0 - Exit
Enter selection:
[1:0:0:0 disk ATA <device info> /dev/sda
Please enter the System-Device ( for example sda )