Ronde & Schwarz CLIPSTER Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 98

Ronde & Schwarz CLIPSTER Скачать руководство пользователя страница 3



3

CLIPSTER | Hardware Guide | Hardware Generation V+

Rohde & Schwarz DVS GmbH

CLIPSTER and Spycer are registered trademarks of Rohde & Schwarz DVS
GmbH. Microsoft and Windows are either registered trademarks or trade-
marks of Microsoft Corporation in the United States and/or other countries.

Any other product names mentioned in this documentation may be trade-
marks or registered trademarks of their respective owners and as such are
subject to the usual statutory provisions.

Headquarters

Rohde & Schwarz DVS GmbH

Krepenstr. 8

30165 Hannover

GERMANY

Phone:+49-511-67807-0

Fax: +49-511-630070

E-mail:[email protected]

Internet:http://www.dvs.de

Support

Phone:+49-511-67807-125

Fax: +49-511-371985

E-mail:[email protected]

Disclaimer

This product was developed and tested thoroughly. Unfortunately, the
possibility of problems and errors can never be ruled out. To support us in
helping you as fast as possible if such a case occurs, please fill in the online
registration form which you can access from http://www.dvs.de.

«
1
2
3
4
5
...
»

Содержание CLIPSTER



































































































Отзывы:

Нет отзывов