manualshive.com logo in svg

Ronde & Schwarz CLIPSTER, Руководство по оборудованию, Страница: 65 / 98

Поделиться
Скачать
Ronde & Schwarz CLIPSTER Скачать руководство пользователя страница 65

Maintenance

Fan Maintenance

65

CLIPSTER | Hardware Guide | Hardware Generation V+

Rohde & Schwarz DVS GmbH

Replacing the Fan

Perform the following steps:

1.

Press the latch of the respective fan module towards the front 
of the system (1).

2.

With the locking mechanism released pull the fan module up 
and out of the system (2).

This will sever the connection of the fan to the system.

3.

Unscrew the finger protection grille from the broken fan and 
afterwards screw off the fan from the fan bracket.

4.

Replace the broken fan with a new one and reassemble the 
fan module: Screw the fan to the fan bracket and afterwards 
the finger protection grille to the fan.

5.

Re-insert the repaired fan module into the system. 

6.

Close the casing of the system as described in section 
“Closing the Casing” on page 62.

System Damage

Third-party spare parts might damage your system.

Only use original manufacturer spare parts.

See to it that the fan module plugs properly into the sys-
tem’s fan interface and that, when completely inserted, 
the locking mechanism snaps back into its locked posi-
tion.

Содержание CLIPSTER



































































































Отзывы:

Нет отзывов