Ronde & Schwarz CLIPSTER, Руководство по оборудованию, Страница: 59 / 98

Maintenance

SSD Disk Maintenance
59 CLIPSTER | Hardware Guide | Hardware Generation V+
Rohde & Schwarz DVS GmbH
4. Take the lever and turn it in its hinge (2) until it cannot be
moved further:

This takes the SSD disk installed in the disk carrier out of the
system’s interfaces inside.
5. Once the interface connections inside the system are severed,
pull the disk carrier out of the system.

Now the SSD disk is removed from the system and it has to
be replaced in the next step.
Replacing the SSD Disk
Perform the following steps:
1. Unscrew the screws that fix the SSD disk to the disk carrier.
2. Exchange the defective disk with a new one and assemble it
in the disk carrier with the screws.

After that the SSD disk is replaced and the disk carrier with
the new disk has to be reassembled in the system.
System Damage
Significant environmental changes, for example,
altitude, voltage, temperature, shock, vibration,
etc., can damage a SSD disk.
Handle SSD disks with great care.
It is best to use the same brand and type of SSD disk
again. Otherwise a loss of performance might oc-
cur.