Ronde & Schwarz CLIPSTER Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 98

Ronde & Schwarz CLIPSTER Скачать руководство пользователя страница 63

Maintenance



Fan Maintenance

63

CLIPSTER | Hardware Guide | Hardware Generation V+

Rohde & Schwarz DVS GmbH

Fan Maintenance

To cool the many SSD disks installed in the system as well as the
other electronic parts (e.g. the motherboard), the system is
equipped with several fans that can be exchanged in case of a
failure easily. This section describes what to do if a fan fails.

The following topics are covered:

■

Preparations (page 63)

■

Replacing the Fan (page 65)

Preparations

High Voltage

The system you are working on operates
with voltages that can be hazardous to your
health

Never work on the system or access its
interior with the power cable(s) being
plugged in.

Make sure the power supply is discon-
nected from the components you
intend to work on.

Maintenance inside the system should
only be performed by personnel quali-
fied for handling and testing electrical
equipment.

Electrostatic Discharge

Computer hardware contains components
that are sensitive to electrostatic discharge.
If you touch them without precautionary
measures, they can be destroyed.

Avoid touching the internal compo-
nents of the computer system.

Alarm

An alarm can be caused by a number of
reasons. Please refer to section “Trouble-
shooting” on page 74 first for further details
about what to do in case of an alarm

«
...
61
62
63
64
65
...
»

Содержание CLIPSTER



































































































Отзывы:

Нет отзывов