Ronde & Schwarz CLIPSTER, Руководство по оборудованию, Страница: 15 / 98

Introduction

Safety Instructions
15 CLIPSTER | Hardware Guide | Hardware Generation V+
Rohde & Schwarz DVS GmbH
■
Computer hardware contains components that are sensitive to
changing voltages. Connecting or disconnecting the R&S DVS
system to or from peripheral hardware while any of them is
switched on may damage the hardware. Switch off all periph-
eral hardware before connecting or disconnecting anything.
■
Use, store and transport the R&S DVS system only in compli-
ance with the technical data laid out in chapter "Appendix"
(page 73).
■
If fluids or solid objects get inside the casing, the R&S DVS
system must be disconnected from the power supply immedi-
ately. Before using the system again, it has to be checked by
authorized service personnel.
■
Only use a damp tissue without any cleaning agents to clean
the casing.
■
The R&S DVS system must not be misused, abused, physically
damaged, neglected, exposed to fire, water or excessive
changes in the climate or temperature, or operated outside
maximum rating.
■
Do not perform any changes or extensions to the R&S DVS
system whatsoever.
Transportation
CLIPSTER is a very sensitive device. Especially the hard disks of
the system must be handled with great care. Therefore, observe
in case of transportation:
■
Handle the R&S DVS system with great care.
■
Always use the original packing or a similar structured packing
for transportation as detailed in section “Packing Instructions”
on page 89.
■
Avoid shocks or vibrations during transport. For longer
distances it is recommended to use a lifting truck.
■
Keep the R&S DVS system as a transportation good dry.
■
In the warranty period you have to keep the original packing
and use it in case of transportation.