Ronde & Schwarz CLIPSTER, Руководство по оборудованию, Страница: 14 / 98

Introduction

Safety Instructions
14 CLIPSTER | Hardware Guide | Hardware Generation V+
Rohde & Schwarz DVS GmbH
Safety Instructions
This topic describes the basic safety instructions:
It contains the following sections:
■
General (page 14)
■
Transportation (page 15)
■
Environmental Conditions (page 16)
General
To correctly use the CLIPSTER heed the following:
CLIPSTER has been built according to the applying safety regula-
tions. To minimize the possibility of a faulty operation of the
device all manuals and guides must be available at all times at the
operation site. Before installing and/or using the R&S DVS system
the manuals and guides delivered with it must be read and
observed:
■
Use the R&S DVS system only in apparent good technical
order
■
The hardware of the R&S DVS system works with voltages
that can be hazardous to your health. Never work on the
system or access its interior with the power cable(s) being
plugged in. Make sure the power supply is disconnected from
the components you intend to work on.
■
Computer hardware contains components that are sensitive to
electrostatic discharge. If you touch them without precau-
tionary measures, they can be destroyed. Use a wrist strap
connected to ground when accessing electronic parts and
take care of grounding the system. Avoid touching the internal
components of the R&S DVS system whenever possible.
Inappropriate use
If the R&S DVS system is not used in compliance
with the safety instructions, the warranty and all re-
sulting liability claims will be void.
Carefully read the following safety instruc-
tions before attempting any installation
and/or performing any work on the system
hardware
.