16
Leg Installation/Adjustments/Alignment
The range must be used only with the
legs properly installed.
Four
height
adjustable
legs,
assembled under the bottom of the
range
Four height adjustable legs are delivered
with the range in the polysterene
container situated over the appliance.
Before installing the legs, position the
appliance near its final location as the legs
are not suitable for moving the appliance
over long distances.
After unpacking the range, raise it enough
to insert the legs in the appropriate
receptacles situated on the lower part
of the appliance. Lower the range gently
to keep any undue strain from legs and
mounting hardware. If possible use a
pallet or lift jack instead of tilting the unit.
NOTE: please install the front legs
first, and then the back legs, to avoid
any damage to the unit.
Adjust leg height to the desired level
by twisting the inside portion of the
leg assembly until the proper height
is reached. Check with a level that the
worktop allignement is perfectly level.
Insert the legs in the appropriate
receptacles
Remember that is indicated to set the high
corner of range so that the top of side
trim is 3/8” (0.95 cm) above countertop.
(see paragraph “Dimension”)
