
27
Replacing Oven Light
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect the electric power at the main fuse or circuit
breaker before replacing bulb.
WARNING
DO NOT
touch bulb with bare hands. Clean off any signs of oil from the bulb and
handle with a soft cloth.
OVEN SIDEWALL GRIDS (FIG. 14)
To allow for a better cleaning of the side grids, you can extract them this way:
1. Push with a finger on the last of the slots to release the grid from its hold.
2. Lift it towards the top and extract the grid.
To put them back into place, reverse the order of this operation.
REPLACING THE OVEN LAMP (FIG.15)
n the event the oven lamp needs replacing, the new lamp must comply with the
following requisites:
15 W - 230 V~ - 50 Hz - E 14 - and must be resistant to high temperature.
To change the oven lamp follow the instructions :
Draw out the side guide rails as described above.Then remove the glass protection cap
(V) from the bulb socket, lifting it with a screwdriver placed between the cap and the
oven wall and replace the lamp (L). Fit the accessories back in reverse order.
14
15