![background image](http://html.mh-extra.com/html/roma/rp36df-1-ss/rp36df-1-ss_manual_1483924018.webp)
18
Connecting Gas & Electric
DANGER
GAS LEAK HAZARD
To avoid risk of personal injury or death; leak testing of the
appliance must be conducted according to the manufacturer’s
instructions. Before placing appliance in operation, always
check for gas leaks with soapy water solution.
• DO NOT USE AN OPEN FLAME TO CHECK FOR GAS LEAKS.
Connect gas and electrical.
Before placing appliance in operation,
always check for gas leaks. This must
be performed by your dealer, a qualified
licensed plumber, or gas service company.
Before Using
All products are wiped clean with solvents at the factory to remove any visible signs of
dirt, oil, and grease which may have remained from the manufacturing process. Before
starting to cook, clean the range thoroughly with hot, soapy water. There may be some
burn off and odors on first use of the appliance this is normal.
Oven
Important! Before first use, wipe interior with soapy water and dry
thoroughly. Then set the oven selector to bake, the thermostat to 450°F or
500 °F, and operate for an hour.
This appliance is certified by Star-K to meet strict regulations in conjunction with
specific instructions found
on www.star-k.org
Connecting the power cord
IMPORTANT:
The wires in
the mains lead are colored and
correspond to the following
prescription
L1
(phase 1)
= BLACK
L2
(phase 2) = RED
N
(neutral) = WHITE
(Ground) = GREEN