28
DOOR REMOVAL
The oven door can be removed to give easier
access to the oven when cleaning.
To remove, proceed as follows:
Open the oven door and insert rivet or nail (R)
in the hole (F) of the hinge (fig. 16).
Partially close the door, forcing it upwards at
the same time to free stop tooth and hinge
sector.
Once the hinge is free, pull the door forwards
tilting it slightly upwards to free sector.
To reassemble proceed in the reverse order,
paying attention to the correct position of
sectors.
WARNING
TO PREVENT PERSONAL INJURY
Before removing the doors, make sure the pins are properly installed in the
hinges. Failure to do so can result in personal injury to hands and/or fingers.
One of the features of our cookers is that the inner oven door glass can be easily
removed for cleaning.
Open the oven door.
Unscrew the two fixing screws located on the upper door profile (fig. 17).
Remove the support securing the glass (fig. 18).
Assamble again the door repeat all the operations but exactly one after the
other in the reverse sequence.
Before closing the door don’t forget to remove the pins.
16
Installation/Door removal
NOTICE
DO NOT
use the handle or oven door to lift the oven.
DO NOT
lift or carry the door
by the handle.
Removing the door must be done by your dealer, a qualified licensed plumber, or
certified gas installer.
17
18
