60
Information That You May Find Useful
Installing the U-8 Driver Separately
You can install the driver separately without using the setup program on
the CD-ROM. In this case, you should first delete the U-8 driver and
unneeded drivers that is installed on your computer, then follow the
procedure below to reinstall the U-8 driver. However, to make the
program work correctly, it is recommended to use the setup program (p.
p. 15).
1.
Start up Windows.
2.
Use a USB cable to connect the U-8 to the computer.
3.
Turn on the power of the U-8.
4.
The
Add New Hardware Wizard
dialog box will appear, and will
indicate
This wizard searches for new drivers for : USB Composite
Device.
Click
Next>
.
* If the display indicates
Unknown Device
instead of
USB Composite
Device
, the installation procedure cannot be continued, so click
Cancel
to
terminate the installation procedure. Then refer to “
Deleting Unneeded
Drivers Installed with the U-8 Connection
(p. 58).”
5.
When you are asked
What do you want Windows to do?
, select
Display a list of all the drivers in a specific location, so you can
select the driver you want.
, and click
Next >
.
6.
When the display asks
Select the manufacturer and model of your
hardware device.
click
Have disk
.
7.
The
Install From Disk
dialog box will appear. Type your CD-ROM
drive,
E:\
for example, (if the CD-ROM drive is drive E) in the
Copy
manufacturer’s files from:
and click the
OK
button.
8.
Verify that
Roland U-8 USB Driver
is displayed as the model, and click
Next >
.
9.
When the display indicates
Windows driver file search for the
device.
click
Next >
.
The driver files will be copied. Wait until the copying is completed.
10.
Click
Finish
to end the procedure.
Содержание U-8CW
Страница 76: ...02233567 00 8 H2 21N ...