Roland U-8CW, Руководство по началу работы

Страница: 15 / 76

15
Getting Ready to Use the U-8
Connecting the Unit
To use the U-8, you need to connect a computer, and headphones or an
amplifier. Refer to the explanation below, and make the connections that
best suit your setup.
Before making connections, make sure that (1) the power switch is turned
off and (2) the Master Volume fader is lowered all the way.
fig.04-09.e
1. Making Connections for Hearing Sound
To hear sound from the U-8, use one of the methods below to make the
connections.
Connecting a Speaker with a Built-in Amp or a Stereo Set
fig.04-03.e
Use the Master Volume fader on the top panel of the U-8 or the volume knob
on the speaker with built-in amp or stereo set to adjust the volume level.
(921)
Connecting Headphones
fig.04-02
Use the Master Volume fader or the Headphones Volume knob on the top
panel to adjust the volume level for headphones.
REC
MONITOR
MASTER
POWER
OFF
ON
1. 2.
Switch off the power button. Lower all the way.
You will need to acquire
and have on hand
whatever equipment or
cables (other than what
came with the U-8) that
you need. When doing this,
take care to ensure that the
configuration of the cable
connectors is compatible.
U-8
LINE IN
INPUT
Left
Right
OUTPUT R
OUTPUT L
Powered Speaker
Stereo Set
R
L
R
L
AUX IN B A MIC
INPUT
GUITAR (Hi-Z) OUTPUT
To prevent malfunction
and/or damage to speakers
or other devices, always
turn down the volume, and
turn off the power on all
devices before making any
connections.
When making a digital
connection between the U-8
and a stereo set, connect
the Digital Output
connector on the U-8 to the
Digital Input connector on
the stereo set. For more
information, refer to
“
Making a Digital
Connection” in “U-8 and
External Equipment” in
the U-8 Technical Guide.
R
L
R
L
AUX IN B A MIC
INPUT
GUITAR (Hi-Z) OUTPUT