Roland U-8CW Скачать руководство пользователя страница 65

Страница: 65 / 76

Information That You Will Find Useful

■

Flanger

The flanging effect gives a twisting, jet-airplane-like
character to the sound.

■

Flex Band Filter

The flex band filter cuts the high and low frequency
range, and the frequencies for each range are freely
adjustable. This is suitable for making lo-fi sounds
such as radio tone.

■

Lo-Fi Saturator

This produces natural distortion like that obtained
with older audio equipment or an AM radio.
It’s ideal for creating lo-fi sounds.

■

Low Cut Filter

This is a filter that cuts unwanted low range noise,
such as pops.

■

Limiter

The limiter attenuates loud input levels to prevent
distortion.

■

Noise Suppressor

The noise suppressor leaves the original sound
unmodified, but mutes only the noise during the
silent intervals.

■

Phaser

Phaser is an effect that adds a phase-shifted sound to
the direct sound, making the sound more spacious.

■

Pan

Pan cyclically moves the stereo position between left
and right (when stereo output is used).

FL Pre Filter

Select the type of filter.

Off:

a filter will not be used

LPF:

cut the frequency range above the Cutoff parameter

HPF:

cut the frequency range below the Cutoff parameter

FL Cutoff
(cutoff frequency)

Adjusts the frequency where the harmonics contents of the sound
is cut off.

FL Manual

Adjusts the center frequency at which the flanging effect will be
applied.

FL Rate

Adjusts the rate at which flanger is modulated.

FL Depth

Adjusts the depth of modulation for the flanger.

FL Phase

Adjusts the spatial spread of the sound.

FL Resonance

Determines the amount of resonance (feedback). Increasing the
value will emphasize the effect, creating a more unusual sound.

FL Balance

Adjust the balance between the effect sound volume and the
direct sound volume.

FL Level

Adjusts the volume.

BF Sw (switch)

Turns the flex band filter effect on/off.

BF High Cut

Adjusts the frequency above which the flex band filter cut the
high frequency range.

BF Low Cut

Adjusts the frequency below which the flex band filter cut the
low frequency range.

BF Level

Adjusts the volume.

ST Sw (switch)

Turns the lo-fi saturator effect on/off.

ST Drive

This parameter adjusts the amount of distortion.

ST Color

Adjusts the sound brilliance. Smaller values produce a
rougher sound, and larger values produce a clearer sound.

ST Level

Adjusts the volume.

LC Sw (switch)

Turns the low cut filter effect on/off.

LC Low Cut

Adjusts the frequency at which the low cut filter will begin to
take effect.

LM Sw (switch)

Turns the limiter effect on/off.

LM Threshold

Adjust this as appropriate for the input signal from your
guitar. When the input signal level exceeds this threshold
level, limiting will be applied.

LM Release

This adjusts the time from when the signal level drops below
the threshold until when limiting is removed.

LM Post Gain

Adjusts the output gain.

LM Level

Adjusts the volume.

NS Sw (switch)

Turns the noise suppressor effect on/off.

NS Threshold

Adjusts the level at which the noise suppressor will begin to take
effect. When the signal drops below the specified level, it will be
muted.

PH Sw (switch)

Turns the phaser effect on/off.

PH Manual

Adjust the center frequency at which the phaser effect will apply.

PH Rate

Adjust the rate at which the phaser will modulate.

PH Depth

Adjust the depth of the phaser effect.

PH Phase

Adjusts the spatial spread of the sound.

PH Resonance

Adjust the amount of resonance. Raising this value will produce a
more distinctive tone.

PH Balance

Adjust the balance between the effect sound volume and the
direct sound volume.

PH Level

Adjusts the volume.

PN Waveform

Select the type of modulation.

Tri:

The sound will be modulated like a triangle wave.

Sqr:

The sound will be modulated like a square wave.

Sin:

The sound will be modulated like a sine wave.

Saw1, 2:

The sound will be modulated like a sawtooth wave.

* The [teeth] in Saw1 and Saw2 point at opposite direction.

PN Rate

Adjusts the frequency (speed) of the change.

PN Depth

Adjusts the depth of the effect.

PN Level

Adjusts the volume.

Содержание U-8CW













































































Результаты поиска

Содержание U-8CW

Отзывы:

Похожие инструкции для U-8CW

Бренды по названию

Популярные бренды

Roland U-8CW, Руководство по началу работы

Результаты поиска

Содержание U-8CW

Отзывы:

Похожие инструкции для U-8CW

Бренды по названию

Популярные бренды