Connect the appropriate input(s)
as shown in the hook-up diagram.
Select the desired input
using the front panel switch.
Connect Hear Back OCTO Mixers to the Network Card
outputs
using CAT5e cables.
Set all Mixer Channels and Master Volume levels to “Off”
(full counter-clock-wise position).
Connect the headphones, in-ear monitors, and/or line outputs
for connecting to wireless in-ear systems, powered monitors, or
other devices requiring line-level inputs.
Apply power to the Hub
.
WARNING
• The Hear Back OCTO is capable of
driving most headphones to extreme
levels that can damage your HEARING!
• ALWAYS turn down the Mixer “Master”
volume down before putting on in-ear
headsets or headphones.
!
HOOK-UP DIAGRAM
CONNECTING THE SYSTEM
1
3
5
6
QUICK START GUIDE
2
Thank you for purchasing the Hear Back OCTO 8-channel personal monitor mixer system!
Use this
Quick Start Guide
to setup quickly and easily. Refer to the
User Guide
for complete
instructions, available online at www.hearback.com/support or scan the QR code above.
1
2
3
4
Hear Back OCTO is proudly designed & assembled
in the U.S.A. by musicians and audio engineers.
SCAN
CODE
FOR USER
GUIDE
HUB REAR PANEL
HUB FRONT PANEL
5
5
6
4
Daisy-Chain Additional OCTO Hubs
ADAT Optical Input
Connect Additional OCTO Mixers
Analog Inputs
4
4
4
5
5
