Roland Sign Maker CAMM-1 PNC-1050, Руководство пользователя

Страница: 30 / 42

28
Clearing the user origin
This cancels the origin point set in step (12)-2 and resets it to the factory default.
Setting the user origin
Use the , , , and keys to move the tool carriage to the position where the origin point is
to be set. The coordinate values shown on the display change as the tool carriage moves. When
the desired position has been reached, press the
ENTER
key to enable the setting.
Move the tool up or down
Move the tool up or down
When cutting operations are not being performed, the tool carriage rests in the up posi-
tion.
Unit setting
This changes the units used for the coordinate values appearing on the display. When set
to [MACHINE,] cutting coordinate units are used. These are displayed as integers, with
each unit equal to 0.025 mm. When [MILI] is selected, the coordinate values are dis-
played in millimeters.
(when millimeters have been selected for [Offset] and [Unit,] the coordinate display is in
millimeters)
(14)
(15)
(16)
(17)
Cutting test execution
This confirms the status of the cutting test. For details, see the explanation of the cutting
test on page 13.
(18)