Roland Sign Maker CAMM-1 PNC-1050, Руководство пользователя

Страница: 11 / 42

9
2.3 Setup Mode and Cutting Mode
The display menus are organized into two modes: Setup Mode and Cutting Mode.
Caution
Be sure to use the handle when raising or lowering the front sheet guide. When the front sheet
guide is raised, the tool carriage moves suddenly, which can be extremely dangerous. Take care
to ensure that your hands or other objects do not become caught in the moving parts.
Gently lower the sheet guide. Misaligned positions of the pinwheels and the pinwheel doors may
result in pin breakage and failure to cut correctly.
Setup Mode
Whenever the Sheet guide is in the raised position, in other words, when sheet (paper) has not yet been
loaded, the unit will be in the Setup Mode. In this mode you can make the settings required in preparing
for cutting (or plotting), such as the settings for the RS-232C communication protocol.
SETUP
MODE
CUTTING
MODE
LOWERED
RAISED
Front sheet guide
Front sheet guide
Cutting Mode
Whenever the Sheet guide is in the lowered position, in other words, after sheet (paper) has already been
loaded, the unit will be in the Cutting Mode.
In this mode you can make the settings associated with sheet movement and the actual cutting operation.
Once the sheet (paper) has been loaded, and the Sheet guide is lowered, the unit switches from the Setup
Mode to the Cutting Mode.
For information on the organization of all the available menus, refer to Chapter 3 "Explanation of Display
Menu”