Front and Rear Panels
Rear Panel
fig.02-03
1. AC Adaptor Jack
Connect the included AC adaptor to this jack.
2. Line Input Volume
Adjusts the input level of the audio from the Line Input Jacks. If the input level is
excessive, exceeding the peak, the Input Level Peak Indicator located on the front
panel will light in red.
3. Line Input Jacks
The LINE OUT jacks of an audio device such as external MIDI sound module or
CD player can be connected here. Depending on the settings of the
UA-100
Controller
and the Effect Type Selector, the audio signal that is input here can be
output directly, or can be output via the effects and volume control.
4. Line Output Jacks
Effects and volume adjustment will be applied to the audio signal that is input
from the Line Input Jacks or the USB connector, and the result will be output in
stereo from the Line Output Jacks.
5. Digital Output Connector
If you wish to output the audio signal in digital form to a digital recorder such as a
MD or DAT, connect an optical digital cable.
6. MIDI OUT 1/2 Connectors
These connectors transmit MIDI messages to other MIDI devices.
7. MIDI IN 1/2 Connectors
These connectors receive MIDI messages from other MIDI devices.
8. USB Connector
When a USB cable is used to connect this to your computer, audio signals and
MIDI messages can be exchanged.
1
2
3
4
8
5
6
7
14
Startup.e 15/6/99 18:42 Página 14
