28
3DISON PRO
User Manual V.1
3DSION Metal Clay Printing
⑤
Attach the Extended Stopper to the lower part of Z
axis to make the printing bed stop at the fixed distance
for metal printing. (Use stopper in the image1 for 3DISON
Multi and use stopper in the image2 for 3DISON PRO. They
differ in length.)
Image 1
Image 2
⑥
Put the ceramic tile on the bed after save x3g. file
in the SD card. Select file to print and start printing.
NOTE : In case the thickness of layer is out of the
range 0.7~1mm when printing, adjust the thickness
by re-tuning the leveling. Or tighten the bolt (small set
screw in the gear) using a supplied hex wrench makes
thicker layer and releasing the bolt makes thinner layer.
Steel
Silver
Bronze
Copper
Annex1. Exchanging the Extruder for the Metal Clay Printing
