27
3DISON PRO
User Manual V.1
3DSION Metal Clay Printing
1. How to install and use extruder
①
First, open the box and take the metal extruder
out of the box. Release 2 bolts on the base part and
separate the extruder installed in 3DISON PRO. Pull
all of the cables out of the PCB and keep the bunch
of nozzles separately.
②
Install the metal extruder by fastening the bolts
with a hex wrench. Connect supplied motor cables
to the motor and PCB.
③ Take the syringe out of the box and insert the
yellow nozzle in the head of the syringe. Insert the
syringe in the installing part of the extruder and
cover it.
NOTE : Check if discharging goes well by pressing the
piston to take about 4~5cm of clay.
④
Turn the biggest gear to the front as shown in
the image so that the belt will be as tight as
possible.
Annex1. Exchanging the Extruder for the Metal Clay Printing
