15
3DISON PRO
User Manual V.1
E. Making a print with CreatorK 8
E1. CreatorK 8 Overview
Rokit Inc. has developed CreatorK 8 to help its users to easily convert STL and OBJ files
into G Code, X3G (Firmware ver. 8.1) format that can be 3D printed with this 3D printer.
You can always expect the best output by changing a variety of settings on CreatorK 8.
Generating G-code
Save into SD Card
Connecting
: When you connect your computer and CreatorK8 with USB cable
Disconnecting
Build
: When you want to print out the x3g file directly through USB cable
Pause
Generating G code to use
Laser Engraver
Menu Bar Overview
E2. How to use CreatorK 8
Basically, it is recommended to use SD card to save .x3g file for 3D printing for safety in
case of power outage. However, you can also print directly on your CreatorK by connecting
your computer to the printer with the USB cable without saving and using SD card.
Installing CreatorK 8
1. Run “CreatorK V8 Install” setup file
