24
3DISON PRO
User Manual V.1
F. Troubleshooting and Maintenance
F1. Troubleshooting (FAQ)
Hardware
Software
A1
It is important to control an ambient temperature of printed object under FFF method in
which filaments are melted and stacked at a high temperature and stacked. When an ambient tem-
perature of printed material is low, shrinkage might happen, and it may also occur if no heat exceed-
ing a predetermined temperature is applied to the output board depending on used material. In
order to prevent shrinkage, the temperature inside the printer must be maintained at a predeter-
mined level or the temperature of output board must be adjusted according to used material.
A1
The dedicated 3DISON’s software (CreatorK) is an optimized program to enable a simple
setting 3D printing whereby no design correction is allowed. Manufacturing and designing of 3D
modeling file must use 3D design program.
A1
Dedicated 3DISON’s software (CreatorK) supports Window and Mac operating systems. These
operating systems can easily be installed and used. Please check our website and download a sepa-
rate manual for more detailed information on usage.
A1
STL file that is identical to the existing 3D modeling file is required. However, the modeling
must be performed in such a manner that a shape to be cut be done in a linear format of 1mm
width, and a thickness to be cut be three times thicker. The modeled STL file can be easily used by
selecting a laser output mode through the dedicated 3DISON ‘s software.
Q. What if the printed object is generated with shrinkage?
Q.Is design also available from the dedicated 3DISON’s software (CreatorK)?
Q. Can MAX OS X use the dedicated 3DISON software (CreatorK)?
Q. What types of 3D files are required to use the laser engraver?
(For Premium)
※ Temperature inside the printer may change depending on the season and surrounding en-
vironments.
