RP208CN User’s and Installer’s Manual Page 9
3
To delete the User Code1, press
[1]
To delete the User Code1, press
[2]
To delete the User Code1, press
[3]
…
The other Codes can be deleted in the same way.
4
Enter the
[#]
5
If successful, the keypad will emit a one-second confirming
tone. The selected User Code is now deleted.
2. Setting Date and Time
Set date: [*]+[6]+[1]+[MASTER CODE]+[MM][DD][YY]
Month, Date and Year should all be two digits.
Set time: [*]+[6]+[2]+[MASTER CODE]+[HH][MM]
Use a 24-Hour format. Hour and Minute should be two digits.
For example, if you want to enter 16:28, August 18, 2006, operate as :
[*]+[6]+[1]+[MASTER CODE]+[08][18][06]
[*]+[6]+[2]+[MASTER CODE]+[16] [28]
3. Displaying System Date and Time
Press
[*]+[4] to check the system time on LCD keypad. And the format
should be:
MM/DD/YY Hour :Minute
4. Setting Follow-me Number
In case of an alarm event, a phone call can be made to one or more
predefined phone number. There are three different tone types that represent
burglary, fire and special emergency alarms.
The Follow-Me function can support four phone numbers for each system.
Make sure the numbers are all correct; then enter [#]. Operate as:
Set Follow-Me Phone NO.1: [*]+[7]+[1]+[MASTER CODE]+Phone NO.1+[#]
Set Follow-Me Phone NO.2: [*]+[7]+[2]+[MASTER CODE]+Phone NO.2+[#]
Set Follow-Me Phone NO.3: [*]+[7]+[2]+[MASTER CODE]+Phone NO.3+[#]
Set Follow-Me Phone NO.4: [*]+[7]+[2]+[MASTER CODE]+Phone NO.4+[#]
