RP208CN User’s and Installer’s Manual Page 8
Setting / Changing the master Codes
Step Operation
1
The system must be disarmed (the ARMED LED will be
OFF). Enter the User Functions Mode [*][5]
2
Enter the current 4-digit Master Code:
For example, Press [ 1][2 ][3 ][4 ]
3
Press [0]
4
Enter the new 4-digit code selected will emit a one-second
confirming tone. The selected User Code is now in effect.
For example, press[5 ][6][7 ][ 8]
5
If successful, the keypad will emit a confirming tone “Beep
－
”. The selected User Code is now in effect.
Setting/Changing 1-9 User Codes
At times, it may be desirable to completely delete a User Code. Note that it is
impossible to delete the Master Code (although it can be changed).
Step Operation
1
The system must be disarmed. Enter the User Functions Mode
[*]
and choose Codes
[5]
Press [*][5]
2
Enter the current 4-digit Master Code:
For example, [5 ][6 ][7 ][8 ]
3
To set/delete the User Code 1, press
[1]
To set/delete the User Code 2, press
[2]
To set/delete the User Code 3, press
[3]
…
The other Codes can be set/deleted in the same way.
4
Enter the new User Code:
For example, [3][3][5][5]
5
If successful, the keypad will emit a confirming tone “Beep
－
”.
The selected User Code is now in effect.
Deleting User’s Codes
At times, it may be desirable to completely delete a User Code. Note that it is
impossible to delete the Master Code (although it can be changed).
Step Operation
1
The system must be disarmed. Enter the User Functions Mode
[*]
and choose Codes
[5], Press [*][5]
2
Enter the current 4-digit Master Code: [5 ][ 6][7 ][8 ]
