Commissioning
R&S
®
TS-PWA3
45
User Manual 1157.8143.12 ─ 17
Figure 4-4: R&S TS-PWA3 Rear View
1 = Case body
2 = Rear case feet (4)
The case of the R&S TS-PWA3 must be opened for internal cabling purposes. To do
this, proceed as follows:
1. Disconnect all connections at the front and rear of the R&S TS-PWA3.
2. Unscrew the four feet at the back of the R&S TS-PWA3.
3. Set the R&S TS-PWA3 on its front handles and carefully pull down the case body
from the R&S TS-PWA3.
The R&S TS-PWA3 is now accessible from all sides. The case is closed in reverse
order of opening.
Cabling
