Rohde & Schwarz TS-PWA3, Руководство пользователя

Страница: 41 / 87

Description
R&S
®
TS-PWA3
25 User Manual 1157.8143.12 ─ 17
Slot Code
13 1100
14 1101
15 1110
16 1111
Note:
0: Pin connected to GND via resistor
1: Pin open
3.3.6 CAN Bus
For controlling of some R&S modules, the CAN bus is used in TS-PWA3. The CAN bus
numbering results from the following scheme:
CANu::v::w::x
u = Board Number
v = Controller Number
w = Device Number
x = Slot Number
Board Number and Controller Number are always 0. The Device Number of the frame
is determined by the settings of the jumpers on the backplane (see
Chapter 3.3.7,
"Configurations with several Frames or Option R&S TS-PXB2" , on page 26). For
Rear-I/O modules like R&S TS-PSYS1 and R&S TS-PSYS2, a 4 has to be added to
the Device Number.
Example:
CAN0::0::5::15
Board Number: 0
Controller Number: 0
Device Number: 5 (Device 1, Rear-I/O)
Slot Number: 15
The following table shows the jumper configuration for the bus terminations CAN1
(System) und CAN2 (User).
Construction