manualshive.com logo in svg

Rohde & Schwarz TS-PWA3, Руководство пользователя

Поделиться
Скачать
Rohde & Schwarz TS-PWA3 Скачать руководство пользователя страница 38

Description

R&S

®

 TS-PWA3

22

User Manual 1157.8143.12 ─ 17

Figure 3-12: Use of the Analog Bus in the R&S TS-PWA3 (Example)

3.3.3.3

 

Power Backplane

The use of a second cPCI PSU in slots A1, A2 requires the optional Power Backplane
(conforms to standard PICMG 2.0). From the Power Backplane, a cable with three con-
nectors leads to a 24-pin ATX connector on the cPCI backplane. The three connectors
are as follows (see also 

Chapter 8, "Interface Description"

, 

on page 52 Interface

Description):

●

X12, 20-pin

●

X13, 10-pin

●

X16, 4-pin

The second PSU can be used to boost the power of the standard PSU when connec-
ted in parallel. Alternatively it can be used to supply the device on test.

3.3.3.4

 

Backplane Extension R&S TS-PXB2 (Option)

The R&S TS-PXB2 option expands the Test System Versatile Platform R&S TS-PWA3
by 2 CAN bus slots (A1 and A2). It can be integrated ex works only.

The two slots are intended for the R&S TS-PIO3B or R&S TS-PTR options. The R&S
TS-PIO3B is an 8-channel, 8-bit Open Collector Digital I/O card with additional func-
tions.

The R&S TS-PTR is a passive feedthrough circuit board. It can be used to feed as
many as 24 signals through the device.

Ports 5, 6 and 7 of the R&S TS-PIO3B in slot A1 are routed to connector X1 on the
rear panel.

Ports 5, 6 and 7 of the R&S TS-PIO3B in slot A2 are available on connector DIO on the
rear I/O slot A4.

Construction

Содержание TS-PWA3
























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды