Rohde & Schwarz SML01, Руководство по эксплуатации

Страница: 172 / 299

Status Reporting System R&S®SML / R&S®SMV03
1090.3123.12 E-6 5.24
Reset Values of Status Reporting System
Table 5-4 lists the commands and events that cause a reset of the status reporting system. Except for
*RST and
SYSTem:PRESet
, none of the commands has an effect on the functional settings of the
instrument. It should be noted in particular that DCL also does not change instrument settings.
Table 5-4 Resetting of instrument functions
Event
Switching on of
AC supply voltage DCL, SDC
Power On Status
Clear
(Device Clear,
Selected Device
Clear)
*RST or
SYSTem:PRESet
STATus:PRESet *CLS
Effect 0 1
Clears STB, ESR yes yes
Clears SRE, ESE yes
Clears PPE yes
Clears EVENt parts of the
registers yes yes
Clears ENABle parts of all
OPERation and
QUESTionable registers,
fills ENABle parts of all
other registers with "1" yes yes
Fills PTRansition parts
with "1",
clears NTRansition parts yes yes
Clears error queue yes yes yes
Clears output buffer yes yes yes 1) 1) 1)
Clears command
processing and input
buffer yes yes yes
1) Each command which is the first in a command line, ie which directly follows the <PROGRAM MESSAGE TERMINATOR>, clears the output
buffer.