Rohde & Schwarz R&S ATS1000, Инструкция по эксплуатации, Страница: 19 / 81

Machine Overview
R&S
®
ATS1000
19 Instructions Handbook 1179.2983.02 ─ 01
The door handle (2) is used to open and close the door manually, but does not lock
and unlock the door.
The [LOCK / UNLOCK] button (3) operates the electrically powered door locking and
unlocking system. See
Chapter 7.3, "Operating the Door" , on page 44. The green
light in the button indicates that the door is locked and the chamber is in a state ready
for measurements.
Opening the door switches on the light in the chamber's ceiling and releases the inter-
locks, see
Figure 4-2 .
The [Laser] button (4) switches the DUT alignment lasers in the chamber on or off; see
Chapter 4.2, "DUT Alignment Lasers" , on page 25. The button is located next to the
connectors of the power cables (5) for the two laser boxes; see Figure 4-3 .
The four wheels (6) of the chamber have brakes that you can engage or release with
the tip of your foot. See
Chapter 5.1, "Moving the Chamber" , on page 29.
When the door (1) is open as in Figure 4-2 , you can access the chamber's interior to
insert and connect a DUT. In the interior, an expert user can configure the DUT holder,
align the positioners and exchange the measurement antenna. The interior has the fol-
lowing features:
Figure 4-2: Front view of the R&S ATS1000
1 = Upper interlock (male interlock key) for controlling the door locking mechanism
2 = Two door gaskets in recessed grooves
3 = Antenna elevation positioner arm
4 = Antenna boom
5 = Antenna R&S
TC-TA85CP (order no. 1531.8627.02)
6 = Door locking pegs
7 = Door locking latches (can engage with pegs)
8 = Lower interlock (male interlock key) for controlling movement of the positioners and turntable
9 = Lower interlock (keyhole in the door)