Rohde & Schwarz NGMO1, Руководство по обслуживанию

Страница: 4 / 76

Safety Instructions
9. Applicable local or national safety regulations and
rules for the prevention of accidents must be
observed in all work performed.
Prior to performing any work on the unit or
opening the unit, the latter must be disconnected
from the supply network.
Any adjustments, replacements of parts,
maintenance or repair may be carried out only by
authorized R&S technical personnel.
Only original parts may be used for replacing
parts relevant to safety (e.g. power switches,
power transformers, fuses). A safety test must be
performed after each replacement of parts rele-
vant to safety.
(visual inspection, PE conductor test, insulation-
resistance, leakage-current measurement, func-
tion test).
10. Ensure that the connections with information
technology equipment comply with IEC950 /
EN60950.
11. Lithium batteries must not be exposed to high
temperatures or fire.
Keep batteries away from children.
If the battery is replaced improperly, there is
danger of explosion. Only replace the battery by
R&S type (see spare part list).
Lithium batteries are suitable for environmentally
friendly disposal or specialized recycling. Dispose
of them in appropriate containers only.
Do not short-circuit the battery.
12. Equipment returned or sent in for repair must be
packed in the original packing or in packing with
electrostatic and mechanical protection.
13. Electrostatics via the connectors may damage the
equipment. For the safe handling and operation of
the equipment, appropriate measures against
electrostatics should be implemented.
14. The outside of the instrument is suitably cleaned
using a soft, lint-free dust cloth. Never use sol-
vents such as thinners, acetone or similar, as
they may damage the front panel labelling or
plastic parts.
15. Any additional safety instructions given in this
manual are also to be observed.
Safety sheet ii