11
Right Side Wall
The Right Side Wall includes trim pieces on both ends that wrap around the Back and Front Walls. Make any
adjustments needed to the Front and Back Walls to allow the trim to wrap around the walls appropriately.
Insert the remaining installation bolts into the predrilled holes to connect the Right Side Wall with the Front
and Back Walls. Again, only finger tighten the bolts. If needed, use a screwdriver to tighten the bolts but do
not tighten completely.
Roof Cap
The Roof Cap has five predrilled holes to pass through the wiring protruding from the top of the Front, Back
and Side Walls. Two holes are in the front of the Roof Cap, one hole on each side, and one in back of the Roof
Cap. The curved end of the Roof Cap is the front.
