37
Installation Bolt Tightening
Using a screwdriver, perform a final tightening of the installation bolts on the Left and Right Side Walls. If the
installation bolts do not tighten easily, adjust any walls as needed until all walls fit flush with one another. DO
NOT over-tighten the bolts as doing so can cause damage to the wood cabin.
Secure the Bench Seats
Using the 2.25 inch bench screws provided in the accessories box, secure the three bench seats to the bench
seat supports.
Door Handle Installation
For Door Handle installation instructions, see Page 38.
Accessories Installation
Installation of the optional accessories can be completed at this time. The accessories can be placed wherever
desired, or not used at all.
Operational check
Perform an Operational Check by turning the sauna on and setting the temperature for 150°F for 60 minutes.
During the first hour of operation the sauna should reach approximately 135°F. Test all lights for proper
operation as well.
