40
Place the inside portion of the door handle onto the upper and lower screw heads so that the handle fits into
the recessed part of the metal washers. (Tip: It is helpful to have the hex screws already started in each of the
four holes.)
Using the hex screws provided with the handle, insert one small screw into the hole on the top cross section of
the handle and tighten. Repeat for the bottom cross section of the handle. Move to the inside of the handle
and repeat for the next two screws. It is normal for the hex screws to not sit flush to the handle.
If an alignment issue with the crossbars fitting into the metal washer is encountered, turning the handle 180
degrees will solve the issue.
*
Note
: a detailed video of the door handle assembly can be located on the Rocky Mountain Saunas website at:
https://rockymountainsaunas.com/assembly-videos/
