24
Dust Cover
Install the Cover provided onto the Roof Cap to keep the Roof Cap free of dust. Feed the power cord and the
radio antenna through the hole provided to allow the cover to sit flush on the Roof Cap. If desired, screws are
provided in the Accessories box to attach the Dust Cover to the roof cap. Attachment is not required.
Installation Bolt Tightening
Using a screwdriver, perform a final tightening of the installation bolts on the Left and Right Back Walls. If the
installation bolts do not tighten easily, adjust any walls as needed until all walls fit flush with one another. DO
NOT over-tighten the bolts as doing so can cause damage to the wood cabin.
Secure the Bench Seats
Using the 2.25 inch bench screws provided in the accessories box, secure the bench seats to the bench seat
supports.
